Q-on S-Series UPS, front view
Q-ON S-SERIES1 kVA / 1,000 W
Download 1 & 3 kVA datasheet

Specifications: supplied Q-on S Series 1 & 3KVA UPS Data Sheet.

UPS SystemsSingle-phase online UPS

Q-on S-Series 1 kVA

True online double-conversion protection for servers, networks, telecoms and mission-critical equipment.

Rated capacity1 kVA
TopologyOnline double-conversion
PhaseSingle-phase
Transfer timeZero transfer time
Request a technical consultation
DIRECT ANSWER

The Q-on S-Series 1 kVA is a true online double-conversion UPS for single-phase critical loads that need clean power with no transfer interruption.

Q-on S-Series 1 kVA forms part of Powermode’s ups systems portfolio for South African organisations that cannot afford unstable power or unplanned interruption. The correct capacity, runtime, redundancy and battery architecture depend on the measured load and operating environment.

TECHNICAL INFORMATION

Full product
specifications.

Q-on S-Series 1 kVA / 1,000 W online double-conversion UPS with rack/tower configuration and a 2.8-inch touch LCD.

Configuration notes

Capacity is derated to 80% at 100 VAC, 200 VAC or 208 VAC output. Battery configurations, weights and charging settings vary by model variant; see the supplied datasheet.

Rated capacity1 kVA / 1,000 W
TopologyTrue online double-conversion
PhaseSingle phase with ground
Output power factor1
Nominal input voltage100/110/115/120/127 VAC or 200/208/220/230/240 VAC
Input voltage range at 50% load55–150 VAC ±5% or 110–300 VAC ±5%
Input voltage range at full load80–150 VAC ±5% or 160–300 VAC ±5%
Input frequency range40–70 Hz
Input power factor≥0.99 at nominal voltage and 100% load
Input THDi≤5% at nominal input voltage
Output voltage100/110/115/120/127 VAC or 200/208/220/230/240 VAC
Output voltage regulation (battery mode)±1%
Output waveform (battery mode)Pure sine wave
AC-to-battery transfer timeZero
Inverter-to-bypass transfer time4 ms typical
Output harmonic distortion≤2% THD linear load; ≤4% THD non-linear load
ECO efficiency≥96% with fully charged battery
DisplayBuilt-in 2.8-inch touch LCD
ConfigurationRack or tower
Operating environment0–40°C; 20–90% RH, non-condensing
CommunicationsSmart RS-232/USB; optional SNMP
Dimensions (D × W × H)410 × 438 × 88 mm
AC efficiency≥89% with fully charged battery
Battery-mode efficiency≥88%
KEY FEATURES & BENEFITS

Built around
the application.

True online double-conversion

Output power factor 1

Rack/tower configuration

Hot-swappable battery design

Programmable power management outlets

Adjustable charging current via LCD

WHERE IT FITS

Designed around the application.

01

Servers and networking

02

Telecommunications

03

Security and access systems

04

Critical office infrastructure

START WITH THE RISK

What cannot afford
to go down?

Tell us about the site, critical load or continuity challenge. Powermode will help define the right next step.

Request a power assessment

Open the verified product datasheet